Elkron MP500/16, Руководство по программированию

Страница: 15 / 140

MP500/4N-8-16 Programming 15
1.2.2.1
Use of LEDs and icons with EN50131 grade 3
The visibility of the keypad LED and icon indications without needing to enter a valid code depends on the EN50131 grade (Mode 3,
Mode 2) set during programming.
IMPORTANT! By setting Mode 0 the system will lose EN50131 compliance it potentially had before.
Behaviour in Mode 2 is two-fold: all LED and icon indications are visible when the alarm system is disarmed, while only the power,
timed programmer and system status indications appear when the system is armed (the other LED and icon indications may be viewed
by entering a valid code). This use mode is EN50131 grade 2 compliant.
The alarm system is EN50131 grade 3 compliant in Mode 3. LED and icon indications are not always visible and depend on system
status (armed or disarmed) and whether a valid access code is entered. The indications shown refer to the partitions associated to the
keypad only.
IMPORTANT! Mode 3 is not available for the MP500/4N control panel because this device is EN50131 grade 2, and not grade
3, compliant.
Table 8 - LED indication visibility of EN50131 grade 3 compliant KP500DP/N
– KP500D/ST keypad
shows how the LEDs behave on
the keypad in Mode 3.
Enter a valid code to see details on the indications.
All indications can be deleted using the Installer or Technical Manager codes. Only burglar, power failure and communication failure
indications can be deleted with the Master or User codes.
Alarm system status Armed Disarmed
Access code used No code Master / User
Installer /
Technical
Manager
No code Master / User
Installer /
Technical
Manager
Power LED / icon
■ ■ ■ ■ ■ ■
Failure or warning LED / icon
□ □ ■ ■ ■
Maintenance LED
□ □ ■ ■ ■
Timed programmer icon
■ ■ ■ ■ ■ ■
Open inputs icon
□ □ □ □
Inhibited or isolated inputs icon
□ □ □ □
Alarm icon
□ □ □ □
Tamper icon
□ □ □ □
System status LED
□ □ □ □
■
= The LED / icon indication is always visible even without entering an access code.
□
= The LED / icon indication is only visible after having entered an access code.
Table 8 - LED indication visibility of EN50131 grade 3 compliant KP500DP/N
– KP500D/ST keypad
1.2.3
Partition indications
The partition status is shown on the displays in graphic mode. The partitions appear on two lines.
The meanings are:
Symbol During normal use During programming
partition disarmed partition not associated to the function
partition armed partition associated to the function
partition disarmed with one or more open inputs -
partition does not exist partition does not exist
In the example above, partitions 1 and 5 are armed, partition 12 has one or more open inputs and partition 16 does not exist. The
remaining partitions are disarmed.