MP500/4N-8-16 Programming
43
10) Press
. Press
and
to assign the output to the SYSTEM (all partitions) or only to some
PARTITIONS. Press
to confirm.
11) If SYSTEM is selected, press
and
to select SYSTEM ASSIGN or SYSTEM DO NOT
ASSIGN and press
to confirm. Then
.
12) The screen page shown here by the side will appear if PARTITIONS is selected. The empty boxes
represent partitions which are not assigned to the output and the black boxes the partitions which
have already been assigned. Press
and
to select the partition to be associated. Press
and
to assign the partition (the square will turn black) or to disassociate it (the square will
appear empty). Repeat the procedure for all partitions to be assigned to the output. Press
at
the end. Then
.
13) Press
.
14) Press
. Press
and
to select the output customisation and press
to confirm.
15) Press
.
16) Press
. Enter a descriptive name for the output using the keypad (see paragraph
). The name can be up to 24 characters long. Press
to confirm.
17) Press
.
IMPORTANT!
The vocal name can only be used for "commandable" customised outputs.
18) Press
. Press
and
to select whether the output message must be activated (on) or
deactivated (off). Press
to confirm.
19) Press
to play the vocal message of the output.
20) Press
. To record, press
21) Press
. Press
to delete the vocal message of the output.
22) Press
three times to program the other outputs of the same device repeating the procedure
from step 5. Press
again to program the outputs of another device (expansion modules,
keypads, readers), repeating the procedure from step 4.
23) Press
repeatedly to exit from the menu.
IMPORTANT!
Program all the outputs used by the system.
ASSIGN
SYSTEM
SE##:
□□□□□■□
UC.U1: U01
CUSTOMIZE
CUSTOMIZE
BURGLAR
UC.U1: U01
NAME
NAME
U01:...
UC.U1: U01
VOCAL NAME
VOCAL NAME
MSG OUTPUT ON
MSG OUTPUT ON
PLAY
MSG OUTPUT ON
RECORD
MSG OUTPUT ON
DELETE
Содержание MP500/16
Страница 139: ...MP500 4N 8 16 Programming 139 ...