Elkron MP500/16, Руководство по программированию

Страница: 60 / 140

60 MP500/4N-8-16 Programming
4.18.7
GSM parameters
The following parameters can be configured if the GSM module interface is installed:

SIM PIN : this is used to store the SIM Card PIN code (if required). The code may be from 4 to 6 digits long. The PIN code is
supplied by the GSM network company.
IMPORTANT! The programming procedure is used to store the SIM PIN on the control panel but not to program it on the
SIM Card itself. To program the SIM PIN on the SIM Card, insert the SIM Card in a normal mobile phone, program it using
the functions of the mobile phone and then insert it in the GSM interface of the control panel.

SIM Card Expiry : this is used to store the prepaid SIM Card expiry month and year. The MP500/16 (or MP500/8) control panel will
send a notice message to the vocal numbers and text numbers configured for the event on the first day of the stored month at 10
a.m. It is advisable to set the month before the actual expiry date (for example, set "March" if the SIM Card expires in the month of
April). Reset the new expiry date to be notified after having recharged the SIM Card credit.

Incoming SMS : this is used to enable text message reception for managing controllable outputs.
4.18.7.1
Programming procedure
Proceed as follows to program the GSM parameters:
1) Enter <Installer code> , press , then and finally repeatedly until TELEPHONE DIALER
appears.
2) Press and then several times until GSM PARAMETERS appears.
3) Press .
4) Press . Enter the PIN on the keypad. Press to confirm. To delete a PIN code if it is not
required by the SIM Card, press followed by . Dashes will appear instead of the digits in
this manner, meaning “PIN not programmed”.
5) Press
6) Press . Enter month and year using the keypad. Press to confirm.
IMPORTANT! The day cannot be changed.
7) Press .
8) Press . Press and to select whether to disable or enable incoming SMS text message
reception. Press to confirm.
9) Press repeatedly to exit from the menu.
4.18.8
GPRS parameters
The following parameters can be configured if the GPRS module interface is installed:

APN : Access Point Name, alphanumeric field, max. 25 characters, containing the server web name of the GPRS access provider.

User : alphanumeric field, max. 25 characters for programming the user ID needed to access the network.

Password : alphanumeric field, max. 25 characters for programming the password needed to access the network.

DNS1 : IP address of Domain Name Server 1.

DNS2 : IP address of Domain Name Server 2.

ACCESS NUMBER : telephone number needed to access the GPRS network. This is the number provided by the GPRS access
provider.
The value of all parameters does not need to be known for GPRS configuration because they may be provider-specific. The only
mandatory value is APN.
UT00:INSTALLER
TELEPHONE DIALER
TELEPHONE DIALER
GSM PARAMETERS
GSM PARAMETERS
SIM PIN
SIM PIN
------
GSM PARAMETERS
SIM CARD EXPIRY
SIM CARD EXPIRY
DATE 01/12/22
GSM PARAMETERS
INCOMING SMS
INCOMING SMS
DISABLE