EFORT EC2-S, Руководство по эксплуатации и обслуживанию

Страница: 78 / 121

EFORT INTELLIGENT EQUIPMENT CO.,LTD
68
always on
Green light
flashes
in the process of configuration phase
Red light is
always on
bus error
Red light
flashes
configuration error
Lights go out no configuration
AXIO-E Yellow light
is always on I/O warnings on devices connected to the bus
Red light is
always on
The device connected to the bus has an I/O error
Lights go out no I/O message
CAN-G,R Green light is
always on and
red light goes
out
normal status
Green light
goes out and
red light is
always on
This is the HW communication error or COC0.CFG
initial configuration error file (use the " REPORT
-S " command to diagnose)
Whether the cable is disconnected or connected
incorrectly.
Red light and
green light
flash
alternately
every 200ms
Check and configure the node mapped in the
COC0.cfg file during this period.
Red light and
green light
flash
alternately
every 500ms
Transient phase every time the system starts.
Red light and
green light
flash
alternately
every 2s
During operation, all work stations fail.
Green light
flashes every
500ms and
red light goes
out
During the operation, some of the work stations
fail.