EFORT EC2-S, Руководство по эксплуатации и обслуживанию

Страница: 11 / 121

Electrical Operation and Maintenance Manual for Control Cabinet of EC2-S Industrial Robot
1
Chapter One Safety
1.1
Safety Instructions
According to relevant national and local laws, regulations, and ordinances, safety instructions are the
most basic focus in operating industrial systems including robots.
The factory using robots are liable for personal injury and property damage led by the operation of
robot. Therefore, this manual and relevant materials together with regulations and standards concerning
health and safety must be understood and abided by.
For safety concerns, complying with the requirements in other manuals offered by EFORT is also
strongly advised. Safety information recorded in this manual is general and does not include all the aspects
of the operating system of robots. Therefore, necessary safety measures should be taken and strictly abided
by according to the real operation situations.
Operators must read the following information carefully and pay particular attention to the safety
measures listed in this chapter.
EFORT industrial robot users should ensure compliance with applicable safety laws and regulations of
the host country, and proper design and installation of necessary safety equipment for robot system
operators, whereas operators must familiarize themselves with the following documents detailing operation
and handling of industrial robots:

Safety Manual for Control Cabinet of EC2-S Industrial Robot

Installation and Connection Manual for Control Cabinet of EC2-S Industrial Robot

Electrical Operation and Maintenance Manual for Control Cabinet of EC2-S Industrial Robot

Mechanical Operation and Maintenance Manual for ER7C
、
ER7L
、
ER3B
、
ER10-900 Industrial
Robot
1.2 Safety Criteria
Prohibited Actions
1. Do not arbitrarily modify or dismantle the protective and safety devices of
industrial robot.
2. If waterlogging occurs, do not touch robot. Instead cut off all powers and drain the
site.
3. Industrial robots can only be operated by professionals who have received sufficient
training and guidance including those who have been familiar with this manual.
4. Ensure the surroundings of the emergency stop equipment is unblocked, and do not
pile up debris in front of it, which hinders operation in emergency situations.
5. Do not use inappropriate materials or make improper adjustments and
modifications.
6. Personnel who are unauthorized, or have not received training on operation and