EFORT EC2-S, Руководство по эксплуатации и обслуживанию

Страница: 71 / 121

Electrical Operation and Maintenance Manual for Control Cabinet of EC2-S Industrial Robot
61
4.4.4 Replace the Switching Power Supply
Fig. 4-4 Switching Power Supply
The following table details the steps to replace the switching power supply.
Table 4-10 Steps to Replace the Switching Power Supply
Number Steps
1 Disconnect the power supply of the control cabinet;
2 remove the protective cover of the switching power supply and disconnect
the wiring terminals on the right side of the switching power supply. These
terminals need to be marked with relevant numbers to ensure that they will
not be connected incorrectly when reconnected;
3 use a screwdriver to remove the 4 M3 Phillips screws on the right side
plate.
4 Remove the switching power supply;
5 replace with a new switching power supply; connect the cable; install the
protective cover and power on.
4.4.5 Replace the Fuses, Fuse Cores, and Fuse Gears
Fig. 4-5 Fuses and Fuse Gears
The following table details the steps to replace fuses, fuse cores, and fuse gears.
Table 4-11 Steps to Replace Fuses and Fuse Gears
Number Steps
1
Disconnect the power supply of the control cabinet;