Patient Monitor User Manual User Interface
- 83 -
Chapter 8 User Interface
8.1 Setting Interface Style
The user can set the interface based on the requirement, and the set options include the following:
Sweep of the waveform.
Parameters needing to be monitored.
Changing some settings may have the risk, so only the authorized person can change them. After
changing the settings, please notify the operator.
8.2 Selecting Display Parameters
The user can select the display parameters based on the monitoring and measurement
requirements. To select the parameter, please:
1.
Select the shortcut key
on the screen directly, or
2.
Select
Menu
>
System Setup
>
Module Switch
.
3.
Select the required parameters from the popup interface.
4.
Exit the menu and the screen will adjust the parameters automatically.
8.3 Changing Waveform Position
The user can exchange the waveform positions of parameter A and parameter B with the
following method:
1.
Select waveform A and open the setup menu of waveform A.
2.
Select
Change
from the popup menu and select the desired label name of waveform B from
the pull-down list.
8.4 Changing Interface Layout
Select
Menu
>
Display Setup
to open the
Display Setup
menu on which you can
Select a function screen based on the clinical requirements by configuring
View Selection
.
Select the maximum number of waveforms displayed on the screen by configuring
Wave.
Num.
.
Decide whether the control bar is displayed or not displayed on the screen by setting
Control Bar
to
On
or
Off
.
Содержание iM50
Страница 1: ......
Страница 29: ...Patient Monitor User Manual Basic Operation 17 iM60 iM70 1 2 3 4 5 6 7 8 9 10 11 1 2 3 11 4 5 6 7 8 9 10...
Страница 317: ......
