EDAN iM50, Руководство пользователя

Страница: 225 / 317

Patient Monitor User Manual Using Battery
- 213 -
WARNING
16 Use the battery with similar performance, which can extend the service life of the
battery. If one of the two batteries is malfunctioning, it is recommended to change
both of the two batteries.
17 When the monitor is running on battery power, do not replace the battery during
monitoring patients; or the monitor will be powered off, which may result in patient
injury.
18 Do not place battery in the monitor with the (+) and (-) in the wrong way.
27.2 Battery Power Indicator
The indicator labeled Battery on the front panel of the monitor illuminates in green when the
monitor is battery powered and illuminates in yellow when battery is being charged. The
indicator is not illuminated when the monitor is not powered or when AC power is applied.
27.3 Battery Status on the Main Screen
Battery status symbols show the status of each battery detected and the combined battery power
remaining.
Remaining battery power: 76%~100%.
Remaining battery power: 51%~75%
Remaining battery power: 26%~50%
Remaining battery power: 4%~25%
Batteries are almost depleted and need to recharge immediately.
No battery is installed.
Battery malfunction
27.4 Checking Battery Performance
The performance of rechargeable batteries may deteriorate over time. Battery maintenance as
recommended here can help to slow down this process.
1. Disconnect the patient from the monitor and stop all monitoring and measurement.
2. Switch the monitor power on and fully charge the battery.