EDAN iM50, Руководство пользователя

Страница: 84 / 317

Patient Monitor User Manual Alarm Information
- 72 -
Message Cause
In venipuncture process Venipuncture in process
Venipuncture Ending Finish the assisting venipuncture and the cuff begins to
deflate.
Be sure the cuff is disconnected
from monitor In Cleaning Mode, the user clicks the Start Cleaning
button.
Cleaning succeeded Cleaning finished successfully.
Cleaning failed Abnormal air pressure in cleaning mode.
Cleaning in progress
The monitor is in cleaning progress.
Quick TEMP Is Warming Up Quick TEMP Is Warming Up.
Place Probe On Measure Place Probe isn’t placed on the measurement site.
CO
2
Standby
Turn from measuring mode to standby mode, making the
module in energy-saving status.
CO
2
Sensor Warms Up The CO
2
module is in warm-up state.
CO
2
Zero Start
CO
2
module starts zero calibration.
CO
2
Zero OK CO
2
module completes zero calibration.
Please Press 'Zero'.
Enter the IBP zeroing menu, and zeroing is not performed
yet.
Zero OK IBP completes zeroing.
Pulsatile Pressure Zero Fail.
During the zeroing process, pressure fluctuation is
excessive.
Pressure out of normal
range,Fail. During the zeroing process, pressure value is beyond the
zeroing range.
Sensor Off, Fail! Perform zeroing when the sensor is off.
Invalid Time,Zero Fail. Time is not set up prior zeroing.
Unable to Calibrate in Demo
Mode
Perform zeroing in Demo Mode.
Zeroing... Zeroing is in progress.
Please Press 'Calibrate'.
Enter the Calibration menu, and Calibration is not
performed yet.
Calibration OK
Calibration is completed.
Pulse Pressure Calibration
Failed During the Calibration process, pressure fluctuation is
excessive.
Pressure out of range
During the Calibration process, pressure value is beyond
the Calibration range.