DUPLO SEIKO CORPORATION Duprinter DP-330, Руководство по обслуживанию

Страница: 298 / 330

297
c
HELP Mode Function and Operation Procedures
chap.7
H-70
(1) Adjustment / specification setting HELP mode
ABCD Item Setting
0000
OFF
0001
ON
Key card counter 4 (OP) setting
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Key card counter 4 (OP) setting / Maximum card setting
¡
Following items are indicated.
1. Key card counter 4 setting
2. Maximum card setting
(1) Key card counter 4 (OP) setting / Maximum card setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode
H-70
, and press the
PRINT
key.
HELP-070
Adjustment/Specification setting
1111
1:
1111 2:
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Mode H-69 is not used.
w
Press the and/or key to select item.
2
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
2
When selecting "1. Key card counter 4 setting" in step
w
e
Select an item from the following and follow the steps.
2
Enter the maximum card No. to use by the ten keys "0" and "1".
Example : The maximum card No. is "100"
Enter "1", "0" and "0".
2
When selecting "2. Maximum card setting" in step
w
Maximum
Key card