DUPLO SEIKO CORPORATION Duprinter DP-330, Руководство по обслуживанию

Страница: 281 / 330

280
c
HELP Mode Function and Operation Procedures
chap.7
Display Item Setting
0***
Sign flag
1***
*000
Set amount
Standard (initial value)
Maximum
*001
*010
*011
*100
*101
*110
*111
Lighter by the set amount for the
lower 3 digits
Darker by the set amount for the
lower 3 digits
H-50
(1) Adjustment / specification setting HELP mode
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) Text mode Scan density setting
¡
Following items are indicated.
1. Text mode Scan density (Scanner)
2. Text mode Scan density (ADF)
(1) Text mode Scan density setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-50 , and press the PRINT key.
HELP-050
Adjustment/Specification setting
1111
1:
1111
2:
e
Use the [
0
] and [
1
] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode :
Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Scanner
ADF
w
Press the and/or key to select item.