DUPLO SEIKO CORPORATION Duprinter DP-330, Руководство по обслуживанию

Страница: 241 / 330

a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode :
Enter the desired mode number
using the numeric keys.
240
c
HELP Mode Function and Operation Procedures
chap.7
H-12
(1) Function testing HELP mode
1. Functions
(1) Shading memory, Synchronous signal,Thermistor
temperature, Time lapse from last printing
¡
Following items are checked.
1. Shading memory
2. Synchronous signal
3. Thermistor temperature (
y y
)
4. Time lapse from last printing
2. Operation procedure
Accessing HELP modes
a
See page 219
(1) Checking the Shading memory, Synchronous signal,
Thermistor temperature, Time lapse from last printing
q
Access HELP mode H-12 , and press the PRINT key.
w
Press the and/or key to select the item.
HELP-012
1
: Shading memory
1
: Synchronous signal
1
: Thermistor temperature(
y
)
1
: Time lapse from last printing
Movement test
2
An "FFFF" result display indicates the memory is normal.
Any other display indicates abnormality.
Check of shading memory, and display of result
2
Two digits will be displayed. The first digit represents a count
based on the thermal head PCB unit's synchronized signal, and
the second a count based on the main PCB unit's start signal.
These counts rise from 0 up to 7 , in increments of 1.
The increments occur at intervals of approximately 1 second.
Check of thermal head and main PCB unit synchronized signals
2
The ambient temperature will be displayed as a value
between 0 and 35 (
y y
) .
Display of ambient temperature according to thermistor in main PCB unit
Check that the increment of both digits occurs at a rate of
approximately 1 second per implement, so that over a
period of 10 second
, there is no marked difference between
the two values. A marked difference indicates abnormality.
2
A value between 000 and 255 will be displayed. To obtain
the time lapse since the last print run (in hours) multiply
the value displayed by 3 .
Display of time lapse since last print run
e
Press the STOP key.
The HELP mode selection display will reappear.
Value