DUPLO SEIKO CORPORATION Duprinter DP-330, Руководство по обслуживанию

Страница: 289 / 330

288
c
HELP Mode Function and Operation Procedures
chap.7
H-59
(1) Adjustment / specification setting HELP mode
e
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
(1) "Out of ink" count change,Fine start mode ON/OFF setting
¡
Following items are indicated.
A : ( Not used )
B : ( Not used )
C : "Out of ink" count change
D : ( Not used )
(1) "Out of ink" count change,Fine start mode ON/OFF setting
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode
H-59
, and press the
PRINT
key.
HELP-059
Adjustment/Specification setting
1111
w
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
r
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
Display Item Setting
0
***
1
***
*
0
**
Not used
*
1
**
**
0
*
Changing of out-of-ink count.
Display of out-of-ink count
Changing of count value
Standard (20 revolutions at speed 3)
**
1
*
Treble (60 revolutions at speed 3)
***
0
Not used
***
1
0 0 1 0
Factory setting
Not used