DUPLO SEIKO CORPORATION Duprinter DP-330, Руководство по обслуживанию

Страница: 245 / 330

244
c
HELP Mode Function and Operation Procedures
chap.7
r
Press the [
=
] key.
The correction amount will be memorized in the battery PCB unit's
EEPROM. During memorization,
"SAVE"
will be displayed.
Do not turn off the power before the "SAVE" display has disappeared.
1. Functions
ABCD Item Setting
0***
Sign flag
Rises by the set amount for the
lower 3 digits
1***
Lowers by the set amount for the
lower 3 digits
*000
Set amount
Standard (initial value)
Maximum
*001
*010
*011
*100
*101
*110
*111
(1) Setting correction of master-making start position
(Online) [ Parallel / Inter face kit
2 2
]
H-16
(1) Adjustment / specification setting HELP mode
¡
During memorization:
IMPORTANT :
2. Operation procedure
Accessing HELP modes
a
See page 219
q
Access HELP mode H-16 , and press the PRINT key.
HELP-016
Adjustment/Specification setting
1111 1:
1111 2:
e
Use the [ 0 ] and [ 1 ] numeric keys to enter a 4-place binary
value for the desired correction amount.
See the table below for 4-place binary values and the corresponding
correction amounts.
a
To exit the HELP mode : Turn the power switch OFF.
a
To access another HELP mode : Enter the desired mode number
using the numeric keys.
t
Press the STOP key.
The HELP mode selection display will reappear.
A B C D
- SAVE -
(1) Master-making start position (Online) setting
[ Parallel / Inter face kit
2 2
]
¡
Following items are indicated.
1. Master-making start position setting(Parallel)
2. Master-making start position setting(Inter face kit
2 2
)
Parallel
Inter face
kit
2 2
w
Press the and/or key to select item.