Deif IMD 100, Руководство по интеграции, Страница: 229 / 243

IMD 100 Integration manual 4189360015 Rev. G Parameter description
www.deif.com/wind-power Page 229 of 243
Sub
object
ID Parameter name
Ser. / CAN
Type Function Range Unit Factory
default Data
type Access
7
SETUP_MODE
Configuration Sets the charger in and out of
Setup mode.
0x5555: Setup mode
Any other value: not in
programming mode
NUM 0 U16 RW
8 BUCONTROL Configuration Save and load parameters to /
from EEPROM.
0x1111: Save parameters
from RAM to EEPROM
0x1113: Load parameters
from EEPROM to RAM
NUM 0 U16 RW
10 START_STOP Function Start and stop charging. When
stop is executed, state changes
to ready and waits for start
command. 0: Stop
1: Start
NUM 1 U16 rW
14 VOLTAGE_IMD_SE Status SE voltage measurement by the
IMD. 0 .. 65535 0.1 V N/A U16 RO
15 SE_STORAGE_TYPE Configuration Selection of SE storage type. 0: None
1: Lead acid
2: Lithium Ion
3: Ultra capacitor
N/A 0 U16 RW
16
SE_NOM_VOLTAGE
Configuration The nominal voltage of the SE
from which all other voltage
limits are derived.
0 .. 65535 0.1 V 0 U16 RW
17
SE_MAX_CURRENT
Configuration Base current from which all
other current limits are derived.
0 .. 65535 0.01 A 0 U16 RW
18 BULKCHARGEENDVOLTAGE Configuration End voltage for bulk stage in
percentage of
SE_NOM_VOLTAGE
(Values
above 100% can also be used).
0 .. 65535 0.01% 0 U16 RW
19
BULKCHARGECURRENT
Configuration Bulk stage constant current in
percentage
SE_MAX_CURRENT
.
0 .. 65535 0.01% 0 U16 RW