IMD 100 Integration manual 4189360015 Rev. G
Safety precautions
Page 11 of 243
2.
Safety precautions
Attention
The permitted environmental conditions must be observed.
EN 60204, and relevant local regulations must be observed.
Power supply of protection class I and of protection degree IP20. Do not use outside or in
wet or damp rooms.
The equipment must be installed, operated and used for its intended function as described
by the manufacturer. If this requirement is ignored, safety protection provided by the
equipment may be impaired.
In the event of a fault we recommend that you return the unit to the manufacturer.
Company policy and local regulations regarding PPE must always be followed, regardless
whether the PPE is shown in this manual or not.
2.1
Mechanical work
2.2
Electrical work
Use eye, hand and hearing protection
Use protection for eyes, hand and hearing, if the mounting holes for bolts and
heat sink need to be made.
Caution!
Risk of hand injury.
The IMD is heavy. Be careful with your hands when mounting the IMD in the cabinet.
Disconnect power
Ensure that all power is disconnected when working with the IMD, except for during testing,
commissioning and service.