Daikin RXYQ96PYDN, Руководство по обслуживанию

Страница: 229 / 567

Protection Control SiUS34-801A_b
214 VRVIII R-410A Heat Recovery 60Hz
[INV compressor]
[STD compressor]
8.4 Inverter Protection Control
Inverter current protection control and inverter fin temperature control are performed to prevent
tripping due to a malfunction, or transient inverter overcurrent, and fin temperature increase.
In the case of multi-outdoor-unit system, each INV compressor performs these controls in the
following sequence.
In control of discharge pipe temperature protection
INV Comp. upper
limit step:
1-step down INV Comp. upper
limit step:
1-step up
HTdi>239˚F
or
HTdi>239˚F
Tp>275˚F
or
HTdi<212˚F
Tp<230˚F
HTdi>266˚F
or
HTdi>275˚F
HTdi>248˚F continues for 10 minutes or more.
or
After 30 sec.
After 20 sec.
Frequency agreement
Tp>275˚F
HTdi<230˚F
Tp<257˚F
&
&
52Hz+OFF
HTdi>248˚F continues for 90 seconds
or more.
When occuring 3 times within 100 min.,
the malfunction code “F3” is output.
Normal operation
INV upper limit step=max (Max. step)
Discharge pipe
temperature
standby
or
After 10 min.
Discharge pipe temp.
protection control not limited
HTds>248˚F continues for 5 min. or more.
HTds>275˚F
Tp>275˚F continues for 10 min. or more.
HTds : Value of STD compressor discharge
pipe temperature ( Tds) compensated
with outdoor air temperature
Tp : Value of compressor port temperature
calculated by Tc and Te , and suction
superheated degree.
Applicable STD
compressor stops.