Pilot's Operating Handbook
Section 8
Handling, servicing and maintenance
Edition 0 - March 05, 2019
Rev. 2
Page 8.7.14
BatteryMINDer charger
▲
CAUTION
▲
- Read carefully charger manufacturer instructions before use.
- The charger shall be used only on ground.
- The charger is not designed to be installed permanently on the
airplane
.
- Never charge a frozen battery or one at temperature above 51°C
(123°F)
.
▲
▲
CAUTION
▲
Make sure that the Quick-Disconnect connector (3) is connected to the
battery (4) before setting
BatteryMINDer
charger power.
▲
1 -
Pull down the crash lever.
2 -
Pull the BATT BUS breaker located in the front cargo compartment.
3 -
Remove the cap (1).
4 -
Connect the BatteryMINDer charger connector plug (5) to the airplane
connector (2).
5 -
Connect the BatteryMINDer charger (6) to the electrical mains with plug (7)
.
6 -
Begin the operations according to the charger instruction manual.
7 -
After use, disconnect the BatteryMINDer charger (7) then (5), put the cap (1)
back on the connector (2) and push the BATT BUS breaker located in the front
cargo compartment.
Figure 8.7.5 (1/2) - Removal / Installation of BatteryMINDer charger
1)
Cap
2)
Connector
3)
Quick-disconnect connector
4)
Battery
5)
BatteryMINDer
charger
connector plug
6)
BatteryMINDer
charger
7)
Plug
PIM - DO NOT USE FOR FLIGHT OPERATIONS