Pilot's Operating Handbook
Supplement 63
Lavatory compartment
Edition 1 - November 16, 2016
Rev. 4
Page 9.63.11
Electric connection of the system is performed via a power plug:
>> Up to S/N 1407 without optional 12V power plugs (Pre-MOD70-0174-25)
-
28 volts
>> Up to S/N 1407 with optional 12V power plugs (Post-MOD70-0174-25)
-
12 volts
>> From S/N 1408 (TBM 960 airplane only)
-
115 volts
If the divider stops during deployment or stowing, it is possible to reset the lavatory
compartment. To do so, remove the backrest hatch to access the dedicated circuit
breaker.
>> All
The power plug is located on the right hand side upholstery panel. Connection is only
accessible when the lavatory compartment structure is unscrewed from the floor and
moved slightly aside to access the plug.
The circuit breaker for the power plug is only accessible when the lavatory
compartment is removed.
A mirror automatically illuminates when the divider is deployed.
A safety anti pinching sensor stops the deployment of the divider in case an
interference is detected.
To remove the chemical toilet system from the lavatory compartment structure, it is
necessary to unlatch the toilet cover, remove the top frame, if installed then lift upward
the forward face of the structure and pull out the toilet from the structure.
A storage volume on the left side of the toilet is accessible when toilet cover is up.
A magazine rack is located on the forward side of the fixed part of the divider.
PIM - DO NOT USE FOR FLIGHT OPERATIONS