Pilot's Operating Handbook
Section 7
Description
Edition 0 - March 05, 2019
Rev. 3
Page 7.5.9
Brake system
- see figures 7.5.5 and 7.5.5A
Airplane is equipped with a hydraulically actuated disc braking system installed on the
main landing gear wheels.
Each toe brake at L.H. and R.H. stations is equipped with a master cylinder which
sends hydraulic pressure to the corresponding disc brake : L.H. pedals L.H. brake ;
R.H. pedals R.H. brake. This differential braking helps maneuvering during taxiing.
>> With HomeSafe emergency function (Post-MOD70-0650-34A)
A master cylinder, actuated by a servo-motor, sends hydraulic pressure to the disc
brakes when landing under HomeSafe function.
HS ABN BRAKES
is displayed in the CAS window if the servo-motor is operating.
>> All
Parking brake
- see figures 7.5.5, 7.5.5A and 7.5.6
Parking brake control consists of a control knob located on pilot's side lower
instrument panel and a valve which regulates brake pressure.
To apply the parking brake, press on toe brake of rudder pedals and set the control
knob to ON.
PARK BRAKE
lights on when the control knob is set to ON.
●
NOTE
●
Operating the parking brake knob without applying pressure on rudder pedals
does not cause the wheels to be braked.
●
▲
CAUTION
▲
Failure to apply brake pressure while releasing the parking brake can
damage the parking brake valve. This damage can cause the parking
brake valve to not release the pressure.
▲
To release the parking brake, press on toe brake of rudder pedals and set the control
knob to OFF. Check at the same time that
PARK BRAKE
disappears.
PIM - DO NOT USE FOR FLIGHT OPERATIONS