manualshive.com logo in svg

D-Link DWL-8600AP, Руководство пользователя

D-Link DWL-8600AP - мощная точка доступа для беспроводной сети с широким функционалом. На нашем сайте вы можете свободно загрузить бесплатное "Reference Manual" и другие руководства по использованию. Посетите manualshive.com, чтобы получить всю необходимую информацию для работы с этим продуктом.

Поделиться
Скачать
background image

Configuring Advanced Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 615

D-Link UWS User Manual

DTIM Period

The Delivery Traffic Information Map (

DTIM

) message is an element included in some 

Beacon

 frames. It indicates which client stations, currently sleeping in low-power 

mode, have data buffered on the access point awaiting pick-up.
The DTIM period you specify indicates how often the clients served by this access 
point should check for buffered data still on the AP awaiting pickup.
Specify a DTIM period within the given range (1–255).
The measurement is in beacons. For example, if you set this field to 1, clients will 
check for buffered data on the AP at every beacon. If you set this field to 10, clients 
will check on every 10th beacon.

Beacon Interval

Beacon

 frames are transmitted by an access point at regular intervals to announce 

the existence of the wireless network. The default behavior is to send a beacon 
frame once every 100 milliseconds (or 10 per second).
The Beacon Interval value is set in milliseconds. Enter a value from 20 to 2000.

Automatic Channel

The channel defines the portion of the radio spectrum that the radio uses for 
transmitting and receiving. The range of channels and the default channel are 
determined by the Mode of the radio interface.
When the AP boots, the AP scans the RF area for occupied channels and selects a 
channel from the available non-interfering or clear channels. However, channel 
conditions can change during operation.
Enabling the 

Automatic Channel

 makes APs assigned to this profile eligible for auto-

channel selection. You can automatically or manually run the auto-channel selection 
algorithm to allow the DWS-4000 Series switch to adjust the channel on APs as WLAN 
conditions change.
By default, the global auto-channel mode is set to manual. To enable the automatic 
channel selection mode, go to the 

AP Management > RF Management

 page and 

select Fixed or Interval for the Channel Plan mode. You can also run the automatic 
channel selection algorithm manually from the 

Manual Channel Plan

 page.

Note: 

If you assign a static channel to an AP in the Valid AP database or on the 

Advanced AP Management page, the AP will not participate in the auto-channel 
selection.

Automatic Power

The power level affects how far an AP broadcasts its RF signal. If the power level is 
too low, wireless clients will not detect the signal or experience poor WLAN 
performance. If the power level is too high, the RF signal might interfere with other 
APs within range. 
Automatic power uses a proprietary algorithm to automatically adjust the RF signal 
to broadcast far enough to reach wireless clients, but not so far that it interferes with 
RF signals broadcast by other APs. The power level algorithm increases or decreases 
the power level in 10% increments based on presence or absence of packet 
retransmission errors.

Initial Power

Set the initial power level when a AP is managed by a switch. If you disable the 
automatic power algorithm, the power of the RF signal will keep on this setting. The 
power level is a percentage of the maximum transmission power for the RF signal. By 
default, the power level is 100%.

Minimum Power 

When the automatic power algorithm is enabled, it will not reduce the power below 
the number you set in the minimum power field.
The power level is a percentage of the maximum transmission power for the RF 
signal. By default, the power level is 20%.

Table 355:  Radio Settings (Cont.)

Field

Description

Содержание DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8600AP

Banner SC22-3 Quick Start Manual preview
SC22-3
Бренд: Banner Страницы: 15
U.S. Divers Impulse Service & Repair Manual preview
Impulse
Бренд: U.S. Divers Страницы: 22
Vaillant VRT 350f Installation Instructions Manual preview
VRT 350f
Бренд: Vaillant Страницы: 36
Vaillant VRT 350 Installation Instructions Manual preview
VRT 350
Бренд: Vaillant Страницы: 28
Vaillant VAZ CPC Operating Instructions Manual preview
VAZ CPC
Бренд: Vaillant Страницы: 92
YASKAWA Motoman MLX200 Hardware Installation & Software Upgrade preview
Motoman MLX200
Бренд: YASKAWA Страницы: 121
YASKAWA Varispeed f7 Technical Manual preview
Varispeed f7
Бренд: YASKAWA Страницы: 17
YASKAWA 1000-Series Installation Manual preview
1000-Series
Бренд: YASKAWA Страницы: 30
ICP DAS USA XP-9 88-IoT Series Quick Start Manual preview
XP-9 88-IoT Series
Бренд: ICP DAS USA Страницы: 8
Nabtesco CONPAL NCB-8C-SR User Manual preview
CONPAL NCB-8C-SR
Бренд: Nabtesco Страницы: 24
Neousys Technology Nuvo-3000 Series User Manual preview
Nuvo-3000 Series
Бренд: Neousys Technology Страницы: 101
MSA SUPREMA Touch Installation & Maintenance Instructions Manual preview
SUPREMA Touch
Бренд: MSA Страницы: 309
Oilon VMi 6-17 Installation And Operation Manual preview
VMi 6-17
Бренд: Oilon Страницы: 74
Samson TROVIS 5724-3 Mounting And Operating Instructions preview
TROVIS 5724-3
Бренд: Samson Страницы: 72
Xpelair FR22-30 and Installation And Operating Instructions Manual preview
FR22-30 and
Бренд: Xpelair Страницы: 20
Carrier i-Vu MPC Open XP IO48/816 Installation And Startup Manual preview
i-Vu MPC Open XP IO48/816
Бренд: Carrier Страницы: 50
DAB SMART PRESS WG 1,5HP User Manual Instructions For Installation And Maintenance preview
SMART PRESS WG 1,5HP
Бренд: DAB Страницы: 20
Nanite systems DAX/2 Instructions Manual preview
DAX/2
Бренд: Nanite systems Страницы: 41

Бренды по названию

Популярные бренды

Загрузить еще бренды