manualshive.com logo in svg

D-Link DWL-8600AP, Руководство пользователя

D-Link DWL-8600AP - мощная точка доступа для беспроводной сети с широким функционалом. На нашем сайте вы можете свободно загрузить бесплатное "Reference Manual" и другие руководства по использованию. Посетите manualshive.com, чтобы получить всю необходимую информацию для работы с этим продуктом.

Поделиться
Скачать
background image

Configuring Global and Interface IP Settings

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 298

D-Link UWS User Manual

IpInDelivers

The total number of input datagrams successfully delivered to IP user-
protocols (including ICMP). 

IpOutRequests

The total number of IP datagrams which local IP user-protocols (including 
ICMP) supplied to IP in requests for transmission. Note that this counter does 
not include any datagrams counted in ipForwDatagrams. 

IpOutDiscards

The number of output IP datagrams for which no problem was encountered 
to prevent their transmission to their destination, but which were discarded 
(e.g., for lack of buffer space). Note that this counter would include datagrams 
counted in ipForwDatagrams if any such packets met this (discretionary) 
discard criterion. 

IpOutNoRoutes

The number of IP datagrams discarded because no route could be found to 
transmit them to their destination. Note that this counter includes any 
packets counted in ipForwDatagrams which meet this `no-route' criterion. 
Note that this includes any datagrams which a host cannot route because all 
of its default gateways are down. 

IpReasmTimeout

The maximum number of seconds which received fragments are held while 
they are awaiting reassembly at this entity. 

IpReasmReqds

The number of IP fragments received which needed to be reassembled at this 
entity. 

IpReasmOKs

The number of IP datagrams successfully re-assembled. 

IpReasmFails

The number of failures detected by the IP re-assembly algorithm (for 
whatever reason: timed out, errors, etc.). Note that this is not necessarily a 
count of discarded IP fragments since some algorithms can lose track of the 
number of fragments by combining them as they are received. 

IpFragOKs

The number of IP datagrams that have been successfully fragmented at this 
entity. 

IpFragFails

The number of IP datagrams that have been discarded because they needed 
to be fragmented at this entity but could not be, e.g., because their Don't 
Fragment flag was set. 

IpFragCreates

The number of IP datagram fragments that have been generated as a result of 
fragmentation at this entity. 

IpRoutingDiscards

The number of routing entries which were chosen to be discarded even 
though they are valid. One possible reason for discarding such an entry could 
be to free-up buffer space for other routing entries. 

IcmpInMsgs

The total number of ICMP messages which the entity received. Note that this 
counter includes all those counted by icmpInErrors. 

IcmpInErrors

The number of ICMP messages which the entity received but determined as 
having ICMP-specific errors (bad ICMP checksums, bad length, etc.). 

IcmpInDestUnreachs

The number of ICMP Destination Unreachable messages received. 

IcmpInTimeExcds

The number of ICMP Time Exceeded messages received. 

IcmpInParmProbs

The number of ICMP Parameter Problem messages received. 

IcmpInSrcQuenchs

The number of ICMP Source Quench messages received. 

IcmpInRedirects

The number of ICMP Redirect messages received. 

IcmpInEchos

The number of ICMP Echo (request) messages received. 

Table 173:  IP Statistics Fields (Cont.)

Field

Description

Содержание DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8600AP

Lab.gruppen LAB.LEVEL4 Quick Start Manual preview
LAB.LEVEL4
Бренд: Lab.gruppen Страницы: 2
Frico IHMC6-3 Original Instructions Manual preview
IHMC6-3
Бренд: Frico Страницы: 8
A & H AMFLOW A2-ACM Installation, Operation & Service Manual preview
AMFLOW A2-ACM
Бренд: A & H Страницы: 35
MegaLite MEMO CORE CONTROL User Manual preview
MEMO CORE CONTROL
Бренд: MegaLite Страницы: 11
Kelly KLS4812S User Manual preview
KLS4812S
Бренд: Kelly Страницы: 32
SYCLOPE TERE'O Communications Instructions preview
TERE'O
Бренд: SYCLOPE Страницы: 28
SIATA PS0335 XP0/05 Service Manual preview
PS0335 XP0/05
Бренд: SIATA Страницы: 7
Dieffematic LINEA c400 Instructions And Recommendations For The Installer preview
LINEA c400
Бренд: Dieffematic Страницы: 9
Velleman VDP100TT Manual preview
VDP100TT
Бренд: Velleman Страницы: 11
Cablematic 192DMX User Manual preview
192DMX
Бренд: Cablematic Страницы: 6
Watts Industries MS12832 Installation And User Manual preview
MS12832
Бренд: Watts Industries Страницы: 76
oventrop Hydromat DP DN 20 Operating Instructions Manual preview
Hydromat DP DN 20
Бренд: oventrop Страницы: 40
Samlexpower SMC-10 Owner'S Manual preview
SMC-10
Бренд: Samlexpower Страницы: 24
Leviton ILLUMATECH INF05-1L Installation Instructions preview
ILLUMATECH INF05-1L
Бренд: Leviton Страницы: 2
Samson TROVIS 5179 Mounting And Operating Instructions preview
TROVIS 5179
Бренд: Samson Страницы: 142
Delta Electronics Programmable Logic Controller DVP04AD-H2 Instruction Sheet preview
Programmable Logic Controller DVP04AD-H2
Бренд: Delta Electronics Страницы: 2
SODECA EC CONTROL User Manual preview
EC CONTROL
Бренд: SODECA Страницы: 28
SMSC USB464 Datasheet preview
USB464
Бренд: SMSC Страницы: 65

Бренды по названию

Популярные бренды

Загрузить еще бренды