manualshive.com logo in svg

D-Link DWL-8600AP, Руководство пользователя

D-Link DWL-8600AP - мощная точка доступа для беспроводной сети с широким функционалом. На нашем сайте вы можете свободно загрузить бесплатное "Reference Manual" и другие руководства по использованию. Посетите manualshive.com, чтобы получить всю необходимую информацию для работы с этим продуктом.

Поделиться
Скачать
background image

Basic Setup

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 553

D-Link UWS User Manual

Automatic Channel

The channel defines the portion of the radio spectrum that the radio uses for 
transmitting and receiving. The range of channels and the default channel are 
determined by the Mode of the radio interface.
When the AP boots, each AP radio scans the RF area for occupied channels and 
selects a channel from the available non-interfering or clear channels. However, 
channel conditions can change during operation.
Enabling the 

Automatic Channel

 makes the radio of APs assigned to this profile 

eligible for auto-channel selection. You can automatically or manually run the auto-
channel selection algorithm to allow the DWS-4000 Series switch to adjust the 
channel on APs as WLAN conditions change.
By default, the global auto-channel mode is set to manual. To enable the automatic 
channel selection mode, go to the 

WLAN > Administration > AP Management > RF 

Management

 page and select Fixed or Interval for the Channel Plan mode. You can 

also run the automatic channel selection algorithm manually from the 

Manual 

Channel Plan

 page.

Note: 

If you assign a static channel to a radio of an AP in the Valid AP database or on 

the Advanced AP Management page, the AP radio will not participate in the auto-
channel selection.

Automatic Power

The power level affects how far an AP broadcasts its RF signal. If the power level is 
too low, wireless clients will not detect the signal or experience poor WLAN 
performance. If the power level is too high, the RF signal might interfere with other 
APs within range. 
Automatic power uses a proprietary algorithm to automatically adjust the RF signal 
to broadcast far enough to reach wireless clients, but not so far that it interferes with 
RF signals broadcast by other APs. The power level algorithm increases or decreases 
the power level in 10% increments based on presence or absence of packet 
retransmission errors.

Initial Power

Set the initial power level when a AP is managed by a switch. If you disable the 
automatic power algorithm, the power of the RF signal will keep on this setting. The 
power level is a percentage of the maximum transmission power for the RF signal. By 
default, the power level is 100%.

Minimum Power 

When the automatic power algorithm is enabled, it will not reduce the power below 
the number you set in the minimum power field.
The power level is a percentage of the maximum transmission power for the RF 
signal. By default, the power level is 20%.

RF Scan Other Channels

The access point can perform RF scans to collect information about other wireless 
devices within range and then report this information to the DWS-4000 Series 
switch. 
If you select the 

Scan Other Channels 

option, the radio periodically moves away from 

the operational channel to scan other channels.
Enabling this mode causes the radio to interrupt user traffic, which may be 
noticeable with voice connections. 
When the

 Scan Other Channels

 option is cleared, the AP scans only the operating 

channel.

Table 328:  Radio Settings (Cont.)

Field

Description

Содержание DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8600AP

FAAC 740 D Manual preview
740 D
Бренд: FAAC Страницы: 14
Danfoss VLT series Quick Manual preview
VLT series
Бренд: Danfoss Страницы: 37
Uclear Motion Series User Manual preview
Motion Series
Бренд: Uclear Страницы: 40
Vega VEGAMET 141 Operating Instructions Manual preview
VEGAMET 141
Бренд: Vega Страницы: 20
ZKTeco SpeedFace-V3L Quick Start Manual preview
SpeedFace-V3L
Бренд: ZKTeco Страницы: 14
Unico 11100 Installation And Troubleshooting Manual preview
11100
Бренд: Unico Страницы: 164
SOMFY Situo 1 RTS Manual preview
Situo 1 RTS
Бренд: SOMFY Страницы: 4
Invertek Optidrive Elevator Quick Start Up Manual preview
Optidrive Elevator
Бренд: Invertek Страницы: 5
Techtrol TLIC Instruction And Programming Manual preview
TLIC
Бренд: Techtrol Страницы: 4
MOBA MOBA-Matic MMC-1000 User Manual preview
MOBA-Matic MMC-1000
Бренд: MOBA Страницы: 172
KELCO PG20 Series Instructions For Installing And Using preview
PG20 Series
Бренд: KELCO Страницы: 4
YOKOGAWA Revolution FA-M3 R Technical Information preview
Revolution FA-M3 R
Бренд: YOKOGAWA Страницы: 57
Daktronics All Sport 1600 Series Operation Manual preview
All Sport 1600 Series
Бренд: Daktronics Страницы: 92
Magpowr DIGITRAC 2 Instruction Manual preview
DIGITRAC 2
Бренд: Magpowr Страницы: 22
Aaeon TKS-G20-LN05 Manual preview
TKS-G20-LN05
Бренд: Aaeon Страницы: 54
Elan gSC2 Quick Install Manual preview
gSC2
Бренд: Elan Страницы: 2
Oki ML66592 User Manual preview
ML66592
Бренд: Oki Страницы: 466
Gardner Denver Governor TEN014980 User Manual preview
Governor TEN014980
Бренд: Gardner Denver Страницы: 194

Бренды по названию

Популярные бренды

Загрузить еще бренды