manualshive.com logo in svg

D-Link DWL-8600AP, Руководство пользователя

D-Link DWL-8600AP - мощная точка доступа для беспроводной сети с широким функционалом. На нашем сайте вы можете свободно загрузить бесплатное "Reference Manual" и другие руководства по использованию. Посетите manualshive.com, чтобы получить всю необходимую информацию для работы с этим продуктом.

Поделиться
Скачать
background image

Configuring Spanning Tree Protocol

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 246

D-Link UWS User Manual

Bridge Max Age (secs)

Specifies the switch maximum age time, which indicates the amount of time 
in seconds a bridge waits before implementing a topological change. The valid 
range is 6-40, and the value must be less than or equal to (2 * Bridge Forward 
Delay) – 1 and greater than or equal to 2 * (Bridge Hello Time +1). The default 
value is 20.

Bridge Hello Time (secs)

Specifies the switch Hello time, which indicates the amount of time in seconds 
a root bridge waits between configuration messages. The valid range is 1-10, 
and the default value is 2. The value must be less than or equal to (Bridge Max 
Age / 2) – 1. The default hello time value is 2.

Bridge Forward Delay (secs)

Specifies the switch forward delay time, which indicates the amount of time 
in seconds a bridge remains in a listening and learning state before forwarding 

packets. The value must be greater or equal to (Bridge Max Age / 2) + 1. The 
time range is from 4 seconds to 30 seconds. The default value is 15.

Spanning Tree Maximum 
Hops

Specifies the maximum number of bridge hops the information for a particular 
CST instance can travel before being discarded.

BPDU Guard

Enable or disable the BPDU Guard.The switches behind the edge ports that 
have BPDU guard enabled will not be able to influence the overall  topology. 
Using the BPDU Guard feature can help enforce the  domain borders and keep 
the active topology be consistent and predictable.

BPUD Filter

Enable or disable the BPDU Filter. When BPDU filtering is enabled, the port 
drops the BPDUs received.

Spanning Tree Tx Hold Count

Configure the maximum number of BPDUs the bridge is allowed to send 
within the hello time window.The default value is 6.

Bridge Identifier

The bridge identifier for the CST. It is made up using the bridge priority and the 
base MAC address of the bridge.

Time Since Topology Change

Displays the total amount of time since the last topographic change. The time 
is displayed in hour/minute/second format, for example, 5 hours 10 minutes 
and 4 seconds.

Topology Changes Counts

Displays the total amount of  state changes that have occurred.

Topology Change

Indicates whether a topology change is in progress on any port assigned to the 
CST. The possible values are True or False.

Designated Root

Displays the bridge identifier of the root bridge, which is made up from the 
bridge priority and the base MAC address of the bridge.

Root Path Cost

Displays the cost of the path from this bridge to the designated root.

Root Port

Indicates the root port of the selected instance.

Max Age

Shows the path Cost to the Designated Root for the CST.

Forward Delay

Shows the derived value of the Root Port Bridge Forward Delay parameter.

Hold Time

Indicates the minimum time between transmission of Configuration BPDUs.

CST Regional Root

Shows the priority and base MAC address of the CST Regional Root.

CST Path Cost

Shows the path Cost to the CST tree Regional Root. 

Table 133:  Spanning Tree CST Configuration/Status Fields (Cont.)

Field

Description

Содержание DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8600AP

Danfoss ERC 211 User Manual preview
ERC 211
Бренд: Danfoss Страницы: 36
Hach SC4200c User Manual preview
SC4200c
Бренд: Hach Страницы: 36
Unipower PCM500 Series Operating Manual preview
PCM500 Series
Бренд: Unipower Страницы: 24
Zamel ROW-01 Quick Manual preview
ROW-01
Бренд: Zamel Страницы: 2
IBM MTM 2145-SV1 Hardware Installation Manual preview
MTM 2145-SV1
Бренд: IBM Страницы: 214
Lampert PIP 100 Operating Instructions Manual preview
PIP 100
Бренд: Lampert Страницы: 15
MAKOT UMS-04 Series Manual preview
UMS-04 Series
Бренд: MAKOT Страницы: 6
B&K Reference 20 Plus A/V System Controller Owner'S Manual preview
Reference 20 Plus A/V System Controller
Бренд: B&K Страницы: 84
Taconova TACOTHERM FRESH PETA ES 5941S Manual preview
TACOTHERM FRESH PETA ES 5941S
Бренд: Taconova Страницы: 40
Infineon XDPL8220 Getting Started preview
XDPL8220
Бренд: Infineon Страницы: 14
Keysight N4965A Getting Started Manual preview
N4965A
Бренд: Keysight Страницы: 22
MRC TECH 6 0001203 Quick Start Manual preview
TECH 6 0001203
Бренд: MRC Страницы: 2
ARI-Armaturen ARI-PREMIO-Plus 2G Operating And Installation Instructions preview
ARI-PREMIO-Plus 2G
Бренд: ARI-Armaturen Страницы: 52
Texas Instruments TMS320F2837 D Series Errata Sheet preview
TMS320F2837 D Series
Бренд: Texas Instruments Страницы: 48
Quantum Research Group QMatrix QT60486 User Manual preview
QMatrix QT60486
Бренд: Quantum Research Group Страницы: 11
Vestax PMC-06Pro T User Manual preview
PMC-06Pro T
Бренд: Vestax Страницы: 4
Eliwell IC 912 LX Pt100 R Manual preview
IC 912 LX Pt100 R
Бренд: Eliwell Страницы: 8
Visionis VIS-3002 User Manual preview
VIS-3002
Бренд: Visionis Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды