manualshive.com logo in svg

D-Link DWL-8600AP, Руководство пользователя

D-Link DWL-8600AP - мощная точка доступа для беспроводной сети с широким функционалом. На нашем сайте вы можете свободно загрузить бесплатное "Reference Manual" и другие руководства по использованию. Посетите manualshive.com, чтобы получить всю необходимую информацию для работы с этим продуктом.

Поделиться
Скачать
background image

Basic Setup

D-Link

Unified Wired and Wireless Access System 

Oct. 2015

Page 541

D-Link UWS User Manual

IP Address

This field shows the IP address of the WLAN interface on the switch. If the switch 
does not have the Routing Package installed, or if routing is disabled, the IP address 
is the network interface. If the routing package is installed and enabled, this is the IP 
address of the routing or loopback interface you configure for the DWS-4000 Series 
switch features.
If routing is enabled, it is strongly recommend that you define a loopback interface 
on the switch. By creating a loopback interface, you can control which routing 
interface the wireless function uses for its IP address when multiple routing 
interfaces exist. This can avoid discovery problems for the discovery modes where 
the AP knows the IP address of the UWS. With the loopback interface, the IP address 
of the wireless function is always the same.
In this context, the loopback interface does not refer to the loopback interface with 
the 127.0.0.1 IP address. When you configure a loopback interface for the wireless 
interface on the switch, it is essentially a permanent logical interface and cannot 
have an IP address of 127.0.0.1. You must create a dedicated subnet for the loopback 
interface, and other devices on the network must be able to contact the IP address 
of the loopback interface.

Switch Static IP Address

If you do not use the an automatically assigned address, enter a static IPv4 address 
for the wireless feature. If Auto IP Assign Mode is enabled, then this setting is 
ignored.

AP Validation

AP MAC Validation

For a DWS-4000 Series switch to manage an AP, you must add the MAC address of 
the AP to the Valid AP database, which can be kept locally on the switch or in an 
external RADIUS server. When the switch discovers an AP that is not managed by 
another DWS-4000 Series switch, it looks up the MAC address of the AP in the Valid 
AP database. If it finds the MAC address in the database, the switch validates the AP 
and assumes management.
Select the database to use for AP validation and, optionally, for authentication if the 
Require Authentication Passphrase option is selected.

• Local: If you select this option, you must add the MAC address of each AP to the 

local Valid AP database.

• RADIUS: If you select this option, you must configure the MAC address of each AP 

in an external RADIUS server.

Require Authentication 
Passphrase

Select this option to require APs to be authenticated before they can associate with 
the switch. 
If you select this option, you must configure the passphrase on the AP while it is in 
standalone mode as well as in the Valid AP database. To configure the pass phrase 
on a standalone AP, log onto the AP Administration Web UI and go to the 

Managed 

Access Point

 page, or log onto the AP CLI and use the 

set managed-ap pass-phrase

 

command.
To configure the passphase for an AP in the local Valid AP database, click the 

Valid 

AP 

tab from the 

Basic Setup

 page. Then, click the MAC address of the AP and enter 

the passphrase in the Authentication Password field. 
If you enable authentication, it takes place immediately after the switch validates the 
AP.

Table 324:  Basic Wireless Global Configuration (Cont.)

Field

Description

Содержание DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DWL-8600AP

Eaton SC100 Operation Handbook preview
SC100
Бренд: Eaton Страницы: 86
Fairchild 63 Installation, Operation And Maintenance Instructions preview
63
Бренд: Fairchild Страницы: 2
Bartec MAK 3003 Manual preview
MAK 3003
Бренд: Bartec Страницы: 26
Zeagle Razor Service Manual preview
Razor
Бренд: Zeagle Страницы: 37
Radware Alteon Installation And Maintenance Manual preview
Alteon
Бренд: Radware Страницы: 98
µ-Dimension D3208 User Manual preview
D3208
Бренд: µ-Dimension Страницы: 48
µ-Dimension D4006 Installation Instructions preview
D4006
Бренд: µ-Dimension Страницы: 2
DeLaval MPCII Memo preview
MPCII
Бренд: DeLaval Страницы: 102
Finnleo SaunaLogic SL2 Control Manual preview
SaunaLogic SL2 Control
Бренд: Finnleo Страницы: 14
Anritsu NF7600 Series Operation Manual preview
NF7600 Series
Бренд: Anritsu Страницы: 74
Adaptec ASR-2045 Important Information About Issues And Errata preview
ASR-2045
Бренд: Adaptec Страницы: 4
Velleman CHLSC2 User Manual preview
CHLSC2
Бренд: Velleman Страницы: 22
National Instruments NI 9683 User Manual And Specifications preview
NI 9683
Бренд: National Instruments Страницы: 27
Ekinex EK-FF1-TP Quick Start Manual preview
EK-FF1-TP
Бренд: Ekinex Страницы: 4
GEM Gemprox-26M Specification Sheet preview
Gemprox-26M
Бренд: GEM Страницы: 2
SIATA PS0335 XP0/05 Service Manual preview
PS0335 XP0/05
Бренд: SIATA Страницы: 7
iNels SA3-02M Quick Start Manual preview
SA3-02M
Бренд: iNels Страницы: 14
MICROMATIC A010240 Installation, Service, And Use Manual preview
A010240
Бренд: MICROMATIC Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды