D-Link DWL-8600AP Скачать руководство пользователя страница 123

Страница: 123 / 754

Managing and Viewing Logs

D-Link

Unified Wired and Wireless Access System

Oct. 2015

Page 123

D-Link UWS User Manual

Syslog Configuration

Use the Syslog Configuration page to allow the switch to send log messages to the remote logging hosts
configured on the system.

To access the

System Log Configuration

page, click

LAN > Administration > Log > System Log Configuration

the navigation tree.

Figure 50: System Log

• If you make any changes to the page, click

Submit

to apply the change to the system.

Table 42: Syslog Configuration Fields

Field

Description

Admin Status

Specifies whether to send log messages to the remote syslog hosts configured on the
switch:

•

Enable:

Messages will be sent to all configured hosts (syslog collectors or relays)

using the values configured for each host. For information about syslog host
configuration, see

“Hosts Configuration” on page 119

•

Disable:

Stops logging to all syslog hosts. Disable means no messages will be sent

to any collector/relay.

Local UDP Port

Specifies the port on the switch from which syslog messages are sent. The default
port is 514.

Messages Received

The number of messages received by the log process. This includes messages that are
dropped or ignored.

Messages Dropped

The number of messages that could not be processed due to error or lack of
resources.

Messages Relayed

The number of messages forwarded by the syslog function to a syslog host. Messages
forwarded to multiple hosts are counted once for each host.

Содержание DWL-8600AP



















































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DWL-8600AP

Отзывы:

Похожие инструкции для DWL-8600AP

Бренды по названию

Популярные бренды

D-Link DWL-8600AP, Руководство пользователя

Результаты поиска

Содержание DWL-8600AP

Отзывы:

Похожие инструкции для DWL-8600AP

Бренды по названию

Популярные бренды