2
Installation
CPI Canada Inc.
Page 2-4
Rev. H Indico 100 Series Service Manual Ch # 740895-04
2.3.1 Lifting
The
Generator
One of the following methods is recommended for lifting or maneuvering the generator. Since the
generator weighs more that 30 kg (65 lbs), proper lifting equipment should be used or additional help
should be obtained to lift the unit. Refer to figure 1E-1 and figure 2-2 for identification of the panels
referenced below.
•
Lifting straps can be used along with a hoist to raise the generator. The straps should be placed
underneath the generator cabinet and along the four sides to properly support the cabinet as it is
raised.
•
Remove the lower front access panel and the lower wiring access panel from the generator cabinet
(refer to 2.4.0 - removing the external covers). The metal cross brace found at the front of the cabinet
(below the circuit board mounting panel) may be used, in conjunction with the lip at the upper edge of
the opening for the lower wiring access panel, as lifting points. Two people (one on each side) will be
required to lift or maneuver the generator cabinet.
Figure 2-1: Generator lifting points
