12.Replace existing 1” fixed cam shelf at
bottom of base cabinet with 5/8” fixed cam
shelf provided in the drawer pack. (Drawer
set will not fit properly with 1” fixed cam
shelf at base of set.)
13.Fasten the drawer runners to the side panels of
the base cabinet, if you have not already done
so. Use two (2) Euro screws per runner to se-
cure each runner to the panel. (See Fig. 7.)
Fig 4
Fig 5
Fig 6
14.
Runner hole pattern: From the top down,
2nd below top fixed shelf (short drawer);
4th hole below top runner (medium drawer);
and 10th hole below runner above for the
largest drawer.
15. Slide drawers into runners. (See Fig. 8.)
Fig 7
7. Assemble the connectors to the drawer face.
Place drawer face on a protected surface with
handle side down. Align front connector (2)
screw holes and pre-drilled holes on drawer
face sides. (See Fig. 4.)
8.
Fasten connectors to drawer face using two
provided #8 x 1/2” pan head screws for each
connector. (See Fig. 5.)
9.
For each of the two larger drawer faces,
secure the side panels to the drawer face with
two additional #8 x 1/2” pan head screws
through the drawer face screw flanges into
the correlating pre-drilled holes on the
drawer face.
10. Secure the face panel to the drawer box
by tightening each connector to the side
panels, making one half turn clockwise on
each connector cam lock. (See Fig. 6.)
11.
Fasten drawer handles to each drawer.
Drawer - 2
MULTI-SUITE SYSTEM ASSEMBLY
73
