a
b
TOP PANEL
BACKING
PANEL
TOP PANEL
a
b
BOTTOM
PANEL
BACKING
PANEL
7.
Place middle fixed shelf between side panels
(so cams face bottom panel as shown in Fig 6.)
Push forward slightlyt to fit cams over screw-in
studs. Tighten cams.
8.
Assemble the drawer if you have not already
done so.
Fig. 4
Fig. 5
Fig. 6
TOP PANEL
Fig. 3
4.
With the top panel still in place, push both
side panels onto screw-in studs. (See Fig.
3.) Use a Philips screwdriver to tighten all
cam locks.
5.
Place backing panel down between side
panels so cams face out as shown in Fig.
4a). Once backing panel rests on top panel,
push forward slightly to fit cams over screw-
in studs. (See Fig. 4b.) Tighten cams.
6.
Turn assembly over so it rests on backing
panel. Place bottom panel down between
side panels (so cams face out as shown in
Fig. 5a.) Push forward slightly to fit cams
over screw-in studs. Tighten cams.
Bench - 2
ACCESSORY ASSEMBLY
67
