PREP
ARA
TION
•
Whenever possible, mount drawer and
basket slides to the vertical partitions
before tower assembly, i.e. before
positioning the partitions in the closet,
while the partitions are lying on the
floor. (See Fig. 1.)
PAR
TS
QTY. DESCRIPTION
1 Basket (6”, 11” or 17”)
2 Slides
4 Euro Screws
INST
ALLA
TION
1. To install slides, first pull black plastic fitting
up (Fig. 2 “A”) to release inner slide from
extension slides. Second, remove inner slide
(Fig. 2 “B”) and attach it to the partition using
two (2) Euro screws per slide (See Fig. 3.)
2. Reattach extentions onto inner slides. (See
Fig. 3.)
However, slides can be attached to up-
right shelf tower partitions when in final
position in the closet.
Fig. 1
•
Baskets must have one fixed shelf installed
above and one below a bank of baskets to
ensure roll smoothly in slide track.
•
Baskets should not be installed higher than
48” from the floor. Most installations will
position the top fixed shelf at 42” from the
floor.
•
To determine slide location, use the spac-
ing guide (next page) to calculate how many
holes to count before installing each basket
slide.
Fig. 2
Fig. 3
Basket
ACCESSORY ASSEMBLY
58
ORDER OF ASSSEMBL
Y
£
Shelving /Towers
£
Drawers and
Doors
£
Top Shelves and Poles
£
Adjustable Shelves
£
Crown Molding
¢
Baskets, Valet Rods,
Tie & Belt Racks, and
other accessories
£
Islands
£
Benches
