DOORS AND DRAWERS
• All doors and drawers are now sold with soft-closing
hinges and slides as standard! (Slides are full
extension.)
• Handles are sold separately and come in two sizes:
knob and 96 mm. Each handle comes with three
sizes of handle screws to fit any MasterSuite door/
drawer type: 1/2", 3/4" and 1".
Doors:
• There are two new templates for doors: hinge plates
and door handles. (Only Hamper Doors are pre-
marked for handles; otherwise, no doors are pre-
marked for handles.) See "Assembly Templates" for
more detailed information on both of these templates.
• Each door should be installed with one soft-close
hinge and one regular hinge (except 55", which gets
two soft close hinges and one regular hinge).
• There is a new Hole Sleeve and Mounting Bolt
(#56514) for mounting doors back to back on a
common panel. Old version for 5/8” material will
not work, except for MultiSuite.
Drawers:
• To accommodate full-extension soft-closing slides,
new panel holes are required to be drilled. A new,
easy-to-remove template is provided for these holes.
See "Assembly Templates" section for more detailed
information.
• All drawer fronts feature a "dimpled" back which
allows you to easily drill your preferred handle
type. Simply, drill a 1/16" pilot hole through the
appropriate back dimples. Turn drawer over and drill
a 3/16" hole through the front for the handle. (This is
the best to prevent chipping.)
Hamper Door:
• Hardware does not come with the door and is sold
separately as a hardware kit (#38295).
• All hamper door fronts feature a "dimpled" back.
Follow steps as detailed above in "Drawers" section
for drilling handle holes.
• The hinge plate template is new and is the same as
the door hinge plate template. See "Assembly
Templates" for detailed information.
Hints, Tips & Ordering - 2
INTRODUCTION
ORDERING TIPS:
Hutch:
For a complete hutch, order
separate components as follows:
• Hutch panel pack
• 20” cam shelves (at least 2)
• 14” cam shelf (at least one for top)
• Cleat (3)
• Optional items (drawers, adjustable
shelves, toe kicks)
• Hardware
Drawer:
Order drawers as follows:
• Drawer box (can be used with
any front). Comes with slides
and hardware
• Drawer front
• Handle
Hamper:
For a complete hamper, order
separate components as follows:
• Hamper Door
• Hamper Hardware kit
• Handle
• Basket
Island Kit:
Components needed to order for
complete island.
• Island kit (1 for ½ island;
2 for full island)
• Top
• Optional accessories (drawers,
doors, adjustable shelves,
hamper, baskets).
9
ISLAND KIT
• Island Kit now includes all
shelves, panels, and hardware.
Top is sold separately. One-half
top and full top available.
• Choice of two (2) countertops
(available as full or half size).
