1.
Lay the side panels down on the floor
and fasten two of them together with
your trimmed 29-3/8" cleat and two (2)
corner shelves, creating a 30-5/8” wide
tower. Secure cleat with one HiLow
Screw through each side panel. Stand
the tower up and place it in the corner.
See Fig. 2.
INST
ALLA
TION
NOTE: Always position the partition cut-out in L-
shaped shelf on the right side, as shown in the the
illustration. Do NOT position fixed shelves closer
than 28” from one another.
Adjustable
shelf
Screws
Fig. 3
NOTE: For purposes
of illustration, Fig. 3
does not show option
of cammed fixed top
shelf or hanging.
2.
Add the third partition panel to the open end
(Fig. 3.), and fasten it to the shelves by
tightening all the cam locks in place
.
3.
Plumb and level the tower. Add shims, if
necessary. Screw the leveled corner tower to
the wall studs using 2- 3/8” screws with cover
caps through each of the cleats, as well as
through the partition installed flush to the wall.
Ensure the tower is adequately secured to
corner wall studs or nearest studs thereto.
4.
Add adjustable shelves (6 shelf pins per shelf)
or hanging bars as desired. (See “Top Shelf and
Pole” in "Shelving/Tower Assembly" section for
additional instructions.)
5.
Continue with installation of other towers.
Corner Tower - 2
SHELVING/TOWER ASSEMBLY
Not less
than 28"
Cut out
on right
side
Cleat
Fig. 2
30
