Island - 3
ACCESSORY ASSEMBLY
65
4. Bring two top panels down (on each side of
divider) onto top screw-in studs in side panels.
Tighten all cams on both facing sides. (See
Fig. 5.)
5. Lay unit on one side panel. Slide bottom
panels in (against divider) and over bottom
screw-in studs. Tighten cams. (See Fig. 6.)
6. Push toe kicks over screw-in studs at toe-kick
locations. (See Fig. 7.) Tighten cams on toe
kicks.
7. Stand unit(s) upright. Position units in their
final location (side-by-side for Full Islands).
Ensure adequate clearance for walking
adjacent to the units and for drawer opening,
etc. To create a Full Island, clamp together
two units side-by-side ensuring the unit faces
are flush. Use two (2) 1” screws to secure two
half islands together. (See Fig. 8.) Remove
clamps.
8. Lay the countertop on the island unit and
square it up. Use 1" screws to attach the
island sections to the countertop through the
two holes in each top panel. (See Figs. 8 and
9.)
9. Install drawers or baskets into island. Add
accessories (doors, adjustable shelves, etc.).
Fig. 5
Fig. 6
Top
Fig. 7
Bottom View
Fig. 8
Fig. 9
