If your closet has one or more angled walls,
the angled wall is likely positioned at a 45˚
angle to the adjacent “square” wall(s),
creating a 135˚ angle instead of the standard
90˚ perpendicular wall. These instructions
provide assistance in the installation of
adjacent towers on these angled walls.
PREP
ARA
TION
If the angled wall is greater or less than 135˚ to the square wall, similar steps can be taken
for installation, with minor adjustments for the different angles. See second half of these
instructions.
PAR
TS
QTY. DESCRIPTION
4 #8 x 1-1/4” Wood Screw (for every 2 partitions on angle)
4 4.5 x 60 mm (2-3/8”) Screw (for every 2 partitions on angle)
4 Angle (Corner) Bracket
INST
ALLA
TION
45˚ ANGLE WALL
1.
Cut the 135˚ angle “wedge” to support
the first partition on the angled wall.
Using scrap 14” top shelving or other
material, measure 14” along the long
edge to “A”. Mark a line across the
shelf using a square, making a square
box (Fig. 1A). Next draw a diagonal
line bisecting the 14” square from
corner to corner.
Measure and mark 14” from the board
corner along the diagonal at “B”. Draw
a line connecting “B” to corner “C”
(Fig. 1C).
Assorted closet components
These instructions do not apply to rail-hung shelf towers. We do not recommend attempting to
connect nearly seamless, continuous top shelving on angled walls with hanging towers.
Install all the other shelving towers and hanging sections on “square” walls first. Then begin
positioning partitions for towers on adjacent angled walls. Before cutting final pole, shelf and
cleat lengths for systems on walls adjacent to angled walls, ensure you fully understand the
positioning, measuring and cutting order to complete this installation.
Fig. 1
2.
Cut the 135˚ triangle wedge from the board.
(See Fig. 1.)
3. Repeat steps 1 and 2 to create a second
wedge. You need two (2) triangles for each
angled corner to fit between two (2) adjacent
angled partitions.
Angled Wall Tower
SHELVING/TOWER ASSEMBLY
31
ORDER OF ASSSEMBL
Y
¢
Shelving /Towers
£
Drawers and
Doors
£
Top Shelves and Poles
£
Adjustable Shelves
£
Crown Molding
£
Baskets, Valet Rods,
Tie & Belt Racks, and
other accessories
£
Islands
£
Benches
