© Office Star Products
Octobre
2013
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when
decreasing tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
To make a warranty claim, contact Parts Department via e-mail
, by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and pull lever (1)
up. To lower seat height sit on chair and pull lever (1) up.
NOTE:
It is normal for chair to slightly lower under body
weight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with
an adjustment knob that will allow the user to change the
tension of the tilting feature. Turn knob (2) clockwise to increase
tension and counter-clockwise to decrease or ease the
tension. To lock return chair to the upright position and push
lever (1) in. To unlock pull lever (1) out.
NOTE:
Be careful not to loosen back tilt adjustment knob
completely.
• ADJUSTABLE ARMS
- Height Adjustment:
Push button (3) in to allow arms to
move up or down freely, release button (3) once the
desired height is reached.
-
Flip Arm:
To flip arms up, simply pull up on arm.
To lower arm, simply pull down on arm.
-
3D PU Pads:
Press button (4) to move arm pad
backwards, inwards, outwards or forward. Release
button (4) once the desired postion is reached.
PIÈCE
QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . . . . 5
3.
Cylindre pneumatique . . . . . . . . . . . . . 1
4.
Plaque du siège . . . . . . . . . . . . . . . . . 1
5.
Coussin du siège . . . . . . . . . . . . . . . . 1
6.
Dossier . . . . . . . . . . . . . . . . . . . . . . . . 1
7.
Bras (7L et 7R) . . . . . . . . . . . . . . . . . . 2
8.
Rondelles plates . . . . . . . . . . . . . . . . . 6
9.
Vis pour les bras . . . . . . . . . . . . . . . . . 6
10.
Vis pour la plaque du siège . . . . . . . 4
11.
Vis pour le support du dossier . . . . . 3
12.
Support du dossier (préinstallé) . . . . 1
13.
Clé allen . . . . . . . . . . . . . . . . . . . . . . 1
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier
les quantités des pièces.
ÉTAPE 1
Insérer cinq Roulettes (2) dans la Base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la Roulette (2)
s’enclencher.
ÉTAPE 2
Fixez les Bras (7L et 7R) au Coussin du siège (5) avec trois Rondelles plates (8) et trous Vis pour les bras (9) pour chaque bras.
SERREZ TOUTES LES VIS VEC LA CLÉ ALLEN (13).
ÉTAPE 3
Fixez la Plaque du siège (4) au Coussin du siège (5) avec la flèche qui se dirige vers l’avant de la chaise en utilisant quatre Vis pour
la plaque du siège (10).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (13).
ÉTAPE 4
Fixez le Support du dossier (12) à l’arrière de la Plaque du siège (4) avec trois Vis pour le support du dossier (11).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (13)
ÉTAPE 5
Introduisez le Cylindre pneumatique (3) à la Base (1) et placez le siège assemblé sur le Cylindre pneumatique (3). Mettez de la
pression vers le bas.
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR RESSERRÉ
COMPLÈTEMENT TOUTES LES VIS.
4
3
1
2
32-E3371F3
FAUTEUIL DE DIRECTION EN CUIR ECO
INSTRUCTIONS DE MONTAGE
32-E3371F3
ECO LEATHER MANAGER’S CHAIR
OPERATING INSTRUCTIONS
ÉTAPE 1
ÉTAPE 2
ÉTAPE 3
ÉTAPE 4
ÉTAPE 5
1
2
7R
8
13
9
10
5
7L
X5
3
4
13
11
12
6
X3
13
X3
X3
X3
X3
8
9
5
4
X4
1
