EM60930C
SCREEN BACK CHAIR
OPERATING INSTRUCTIONS
EM60930C
CHAISE À DOSSIER EN MAILLE
INSTRUCTIONS DE MONTAGE
© Office Star Products decembre, 2022
WORK SMART LIMITED WARRANTY
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
• Leather is not warranted against routine scratching and scuffing, as leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and obtain return authorization. At it’s
option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight on
components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 275 lbs. or less.
The BC9601 is for persons weighing 300 lbs. or less. The BC9602 is for persons weighing 400 lbs. or less. The BC9603 is for persons weighing 500 lbs. or less.
EX1098, EC1283C & ECH12801 are for persons weighing 350 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence,
alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic dam
-
age that may result from normal use. Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this
product. When usage is more than 40 hours per week, a two year warranty on all parts applies. Fabric is warranted for one year. This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail [email protected], by Fax 1-909-930-5629, or
toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30 p.m. Pacific Time.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift
lever (1). To lower seat height sit on chair and lift lever (1).
NOTE:
It is normal for chair to slightly lower under body weight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment knob that will allow the user to change the tension
of the tilting feature. Turn knob (3) clockwise to increase tension
and counter-clockwise to decrease or ease the tension. To lock
return chair to the upright position and push lever (2) down. To
unlock, lift lever (2) up.
NOTE:
Be careful not to loosen back tilt adjustment knob completely.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push button (4) in to allow the arms to move
up or down freely. Release the button (4) once the desired height is
reached.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three months or
as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover as head
covering. It may cause suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les quantités des pièces
reçues sont correctes.
ETAPE 1
Insérer les cinq roulettes (2) dans la base (1). Pousser fermement jusqu’à ce que les roulettes (2) s’encliquettent. Insérer le vérin pneumatique (3) dans
la Base (1).
ETAPE 2
Fixez les bras (7L et 7R) au coussin du siege (5) avec trois vis de bras (11) pour chaque bras (7).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (14).
ETAPE 3
Fixez la plaque du siege (4) au coussin du siege (5) avec la fleche vers l’avant de la chaise avec quatre vis de plaque du siege (8).
SERREZ TOUTES LES
VIS AVEC LA CLÉ ALLEN (14).
ETAPE 4
Fixez la support du dossier (13) au dossier (6) avec quatre vis de dossier (10).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (14)
. Fixez le support
du dossier (13) a l’arriere du coussin de siege (5) avec trois vis du support de dossier (9).
SERREZ TOUTES LES VIS AVEC LA CLÉ ALLEN (14)
ETAPE 5
Placer le siege assemble sur le dessus du vérin pneumatique(3) et pousser vers le bas. Couvrir les trous des support du dossier (13) avec quatre
bouchons en plastique (12).
ATTENTION: AVANT D’UTILISER LE FAUTEUIL, S’ASSURER D’AVOIR SERRE COMPLETEMENT TOUTES LES VIS.
4
ÉTAPE 1
ÉTAPE 2
ÉTAPE 4
ÉTAPE 5
ÉTAPE 3
PIÈCE QTÉ
1.
Base . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2.
Roulettes . . . . . . . . . . . . . . . . . . . . . . . .5
3.
Vérin pneumatique . . . . . . . . . . . . . . . . .1
4.
Plaque du siège . . . . . . . . . . . . . . . . . . .1
5.
Coussin du siège . . . . . . . . . . . . . . . . . .1
6.
Dossier. . . . . . . . . . . . . . . . . . . . . . . . . .1
7.
Bras (7L et 7R)
. . . . . . . . . . . . . . . . . . . .2
8.
Vis de plaque du siège (M6 x 20mm)
. . . .
4
9.
Vis de support du dossier (M8 x 25mm)
. .3
10.
Vis du dossier (M6 x 25mm)
. . . . . . . . .
4
11.
Vis du bras (M6 x 30mm)
. . . . . . . . . . .
6
12.
Bouchons en plastique . . . . . . . . . . . . .
4
13.
Support du dossier . . . . . . . . . . . . . . . .1
14.
Clé Allen (non montré). . . . . . . . . . . . . .1
1
3
2
Front
Back
