8-13
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-03
Chapter 8 Troubleshooting the System
Using Cable Interface debug Commands
debug cable privacy (for Baseline Privacy)
To activate the debugging of baseline privacy, use the
debug cable privacy
command in privileged
EXEC mode. To disable debugging output, use the
no
form of this command.
debug cable privacy
no debug cable privacy
debug cable qos
To activate the debugging of QoS, use the
debug cable qos
command in privileged EXEC mode. To
deactivate debugging of QoS, use the
no
form of this command.
debug cable qos
no debug cable qos
When this command is activated, messages related to QoS parameters are displayed on the
Cisco uBR10000 series router console.
debug cable range (for Ranging Messages)
To activate the debugging of ranging messages from cable interfaces on the HFC network, use the
debug cable range
command in privileged EXEC mode. To deactivate debugging of cable interface
ranging, use the
no
form of this command.
debug cable range
no debug cable range
When this command is activated, ranging messages generated when cable interfaces request or change
their upstream frequencies are displayed on the Cisco uBR10000 series router console.
debug cable receive (for Upstream Messages)
To activate the debugging of upstream messages from cable interfaces, use the
debug cable receive
command in privileged EXEC mode. To deactivate debugging of upstream messages, use the
no
form of
this command.
debug cable receive
no debug cable receive
When this command is activated, any messages generated by cable interfaces and sent to the
Cisco uBR7200 series router are displayed on the router console.
