55-54
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 55 Configuring a VoIP Network
Using SmartPorts
•
Clear all macros and their variables by entering the
clear macro all
command as follows:
Console> (enable)
clear macro all
Clearing all macros....
All macros are cleared
Console> (enable)
•
Clear an individual macro variable from all ports by entering the
clear macro variable
name_of_variable
command as follows:
Console> (enable)
clear macro variable $DATAVLAN
Clearing variable $DATAVLAN for all mod/ports...
Deleting Variable: DATAVLAN ...
Cleared variable DATAVLAN
Console> (enable)
•
Clear an individual macro variable from a single port by entering the
clear macro variable
name_of_variable
mod/ports
command as follows:
Console> (enable)
clear macro variable $AUXVLAN 3/7
Clearing variable $AUXVLAN for mod/port.3/7..
Console> (enable)
•
Clear all macro variables from all ports as follows:
Console> (enable)
clear macro variable all
Clearing all variables for all mod/ports...
All variables in the switch are cleared
Console> (enable)
Displaying Macro Port Mappings
This section describes the various methods of displaying macro port mappings:
•
The syntax is as follows:
show macro map
[
all
] [
name
name_of_macro
] [
port
mod/port
]
•
Display all macro port mappings by entering the
show macro map all
command as follows:
Console> (enable)
show macro map all
Port Macro
----- -----
3/2 videophone
3/7 videophone
Console> (enable)
•
Display the macro port mappings for a specific macro by entering the
show macro map name
name_of_macro
command as follows:
Console> (enable)
show macro map name videophone
Port Macro
----- -----
3/2 videophone
3/7 videophone
Console> (enable)
