44-18
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 44 Configuring Network Admission Control
Configuring Network Admission Control with LAN Port IP
-------- ------------- ----------- ---------- ---------------
7/1 - - - -
Port Posture URL Redirect
-------- ------------ --------------------
7/1 - -
Port Termination action Session id
-------- ------------------ --------------------------------
7/1 - -
Console> (enable)
Displaying Host-Specific Information
To display host-specific information, perform this task in normal mode:
This example shows how to display host-specific information:
Console> (enable)
show eou host 9.6.2.15
HostIP
HostMac
Port
Posture-token
--------------- ----------------- ------ --------------------
9.6.2.15
00-11-85-8d-bf-ab 2/5
Healthy
IP Address
Eou State
AuthType SQTimeout SessTimeout
--------------- ------------- -------- --------- -----------
9.6.2.15 authenticated eap
301
3600
Console> (enable)
Displaying EOU Authentication-Related Information
To display the following authentication-related information, perform this task in normal mode:
•
clientless
—Display all clientless ports
•
eap
—Display all ports with EAP authentication
•
static
—Display all hosts in the exception list
This example shows how to display authentication-related information:
Console> (enable)
show eou authentication eap
Host IP
HostMac
Port
Posture-token
--------------- ------------------ ------- --------------------
9.6.2.15
00-11-85-8d-bf-ab
2/5
Healthy
IP Address
Eou State
AuthType
SQTimeout SessTimeout
--------------- ------------- --------- --------- -----------
9.6.2.15
authenticated eap
301
3600
Task
Command
Display host-specific information.
show eou host
{
ip
|
mac
}
value
show eou host mac_address
mac_address
Task
Command
Display authentication-related information.
show eou authentication
{
clientless
|
eap
|
static
}
