44-15
Catalyst 6500 Series Switch Software Configuration Guide—Release 8.7
OL-8978-04
Chapter 44 Configuring Network Admission Control
Configuring Network Admission Control with LAN Port IP
Enabling or Disabling EOU RADIUS Accounting
To enable or disable EOU RADIUS accounting, perform this task in privileged mode:
This example shows how to enable EOU RADIUS accounting:
Console> (enable)
set eou radius-accounting enable
Radius Accounting for Eou Enabled.
Console> (enable)
Bypassing, Disabling, or Enabling LAN Port IP on a Per-Port Basis
You can bypass, disable, or enable LAN port IP on a per-port basis. Specifying
auto
mode enables LAN
port IP automatically if a client is found.
To bypass, disable, specify auto mode, or set the aaa-fail policy for LAN port IP on a per-port basis,
perform this task in privileged mode:
This example shows how to enable an aaa-fail policy on a port:
Console> (enable)
set port eou 1/2 aaa-fail-policy test_policy
Policy test_policy mapped as aaa-fail-policy on port 1/2
Console> (enable)
This example shows how to enable LAN port IP on port 5/1:
Console> (enable)
set port eou 5/1 auto
EoU enabled on 5/1
Console> (enable)
This example shows how to set port 7/1 to bypass mode:
Console> (enable)
set port eou 7/1 bypass
Eou Bypass enabled on 7/1
Console> (enable)
Initializing LAN Port IP on a Per-Port Basis
To initialize LAN port IP on a per-port basis, perform this task in privileged mode:
Task
Command
Enable or disable EOU RADIUS accounting.
set eou radius-accounting
{
enable | disable
}
Task
Command
Bypass, disable, specify auto mode, or set the
aaa-fail policy for LAN port IP on a per-port
basis.
set port eou
mod
/
port
{
aaa-fail-policy | auto |
bypass | disable | initialize | revalidate
}
Task
Command
Initialize LAN port IP on a per-port basis.
set port eou
mod
/
port
initialize
