manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 118

113

Adjusting Print Head Position

 Adjusting Print Head Position

Adjust the print head position if a color shift is found.
To adjust the print head position, print adjustment patterns and enter adjustment values while looking at the 
printed adjustment patterns.

IMPORTANT

•  Administrative privileges over this printer are required to configure printer settings.

If a user without administrative privileges proceeds with configuration of settings, a message ”You do not have 
rights to printer management. Please contact your system administrator.” appears.
For more details, see

 “Adjusting the Reference Position (P.117)”

.

•  Print head position cannot be adjusted when printing is in progress or an error has occurred.

1 

Check that paper is set in the printer.

2 

Open the properties window of the printer.

 (P.32)

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды