Canon CX-G2400 Скачать руководство пользователя страница 10

Страница: 10 / 210

Names and Functions of Components

Operation Panel

Pause

Tray

Power Key/Lamp

Press this key to turn on/off the printer. This lamp lights
up or blinks depending on the power supply status.

On: The printer is powered on.
Blink: The printer is in sleep mode (power-saving mode).
Off: The printer is powered off.

Status Lamp

This lamp lights up or blinks green or orange.

Lit (green): Printing from the computer is possible

(online mode).

Blink (green): The printer is processing or operating

(printing, cleaning, etc.)

Lit (orange): An operator call error has occurred.

Blink (orange): A service call error has occurred.

Off: Instructions and print data cannot be received

from the computer (offline mode).

Ink Lamps (Bk/C/M/Y)

Each lamp lights up or blinks when the corresponding
ink tank is out of ink or short of ink.

Lit: The ink tank is out of ink or faulty.
Blink: The ink tank is low.
Off: The ink tank is full.

Maintenance Cartridge Lamp

This lamp lights up or blinks when there is limited
space to collect ink in the maintenance cartridge.

Lit: The maintenance cartridge has no free space or it is faulty.
Blink: The maintenance cartridge has a small free space.
Off: The maintenance cartridge has free space.

Содержание CX-G2400



















































































































































































































Результаты поиска

Содержание CX-G2400

Отзывы:

Бренды по названию

Популярные бренды

Canon CX-G2400, Руководство пользователя

Результаты поиска

Содержание CX-G2400

Отзывы:

Бренды по названию

Популярные бренды