manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 73

68

Chapter 2

  

Printing

3 

Adjust the brightness.

1

1.  Select one from [Brighter], [Normal], and 

[Darker].

 

Adjust the brightness of the intermediate colors 
without changing the brightness of the darkest 
and brightest portions.

4 

Adjust the contrast.

1

2

1.  Adjust the contrast by moving the slider.

 

The center of the slidebar is the default position 
(0). The slider can be moved between -50 to 
+50.
Moving the slider to the left decreases the 
contrast.
Moving the slider to the right increases the 
contrast.

 

A contrast value can be directly entered in the 
entry box located to the left of the slider bar.

 

To distinguish clearly between the light portion 
and dark portion, increase the contrast. To 
increase the number of intermediate colors 
by reducing the difference between the light 
portion and dark portion, decrease the contrast.

2. Click [OK].

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды