manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 170

165

List of Error Messages/Warning Messages

 List of Error Messages/Warning Messages

When trouble occurs while operating the printer or printing, the Status Monitor will activate and display error 
messages and warning messages. If problems persist after trying these procedures, please contact your
place of purchase.

IMPORTANT

•  When error messages are displayed the printer will automatically go offline. Depending on the type of error, even 

after handling the error, there are cases where it will not go online automatically. In this case, press the pause key 
and return the printer to online state.

•  If multiple errors occur simultaneously, the errors will be shown in order from the importance.

•  If the Status Monitor is minimized or is in the task tray, Status Monitor window will be displayed when an error 

occurs.

•  After selecting the message displayed, if [Display the details of the Status] is clicked (or the message of the [Status 

Information] is double-clicked), a separate screen will appear to confirm the message details along with steps to 
handle the error.

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды