manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 107

102

Chapter 3  Maintenance

  Replacing the Maintenance Cartridge

When the maintenance cartridge becomes full of collected ink, the Maintenance Cartridge lamp lights up and a 
message “Maintenance cartridge full” appears on the status monitor.

 Replacing the Maintenance Cartridge

When the maintenance cartridge becomes full, replace it with a new one following the procedure described below.

CAUTION

•  For safety, keep the used maintenance cartridge out of the reach of children.

•  If a child licks or swallows ink, consult a physician immediately.

IMPORTANT

•  Do not leave the printer for a long time with the maintenance cartridge removed.

•  Do not insert or remove the maintenance cartridge except when replacing it.

•  Put the used maintenance cartridge in the attached plastic bag, zip the plastic bag closed completely, and then 

dispose of it.

•  Do not shake or strongly press on the maintenance cartridge or hold 

it with the ink inlet down. Ink leaking from the ink inlet could stain 
your clothes or the area around you.

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды