manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 4

iv

Before You Begin

Conventions

WARNING

Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. 
To use the machine safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to persons if not performed correctly. To use the 
machine safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine 
correctly, and avoid damage to the machine or property.

NOTE

Indicates a clarification of an operation, or contains additional explanations for a procedure. Reading these notes 
is highly recommended.

Indicates an operation that must not be performed. Read these items carefully, and make sure not to perform the 
described operations.

Sample Screens

The sample CX-G2400 printer driver screens displayed in this manual were created with Windows 10.

Trademarks

•  Canon and the Canon logo are registered trademarks of Canon Inc.
•   Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States 

and/or other countries.

•   Adobe and Acrobat are trademarks or registered trademarks of Adobe Systems Incorporated in the United 

States and/or other countries.

•  Other brand and product names may be trademarks or registered trademarks of their respective companies.

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды