manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 174

169

List of Error Messages/Warning Messages

Error Message

Error Content

Handling

Data mismatch #****

Abnormal data was received from 
the computer.

Confirm the cable connection and 
print again.

Confirm the printer driver's version 
and the firmware's version. If the 
printer driver and the firmware used 
are not the latest version, download 
the latest version from the website 
and update.

Memory full

Insufficient memory due to the 
overlay printing's form data being 
large.

Click on [Cancel Print Job] in the 
Status Monitor, and cancel printing 
and recreate the form data.

Overlay data error

Error with overlay printing data.

Confirm the cable connection and 
retry printing.

Print head position error #****

Problem with either the transport 
unit or print head.

Remove the transport unit and 
confirm that no foreign matter is on 
the insides.

Open the ink tank cover and 
confirm there is no foreign matter 
around the print head.

Transport unit error #****

There are problems with transport 
unit internals.

Remove the transport unit and 
confirm that no foreign matter is on 
the inside.

Connected to a model other than 
Canon CX-G2400

It is connected to a printer other 
than this printer.

Connect with this printer.

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды