Canon CX-G2400, Руководство пользователя

Страница: 122 / 210

117
Adjusting Print Head Position
6
[Step 2] Check the reference position.
Check whether the black frame is centered on the paper.
If the black frame is not centered, adjust the reference position. (Normally, it is not necessary to adjust the
reference position.)
2
1. Check whether the black frame is
centered on the paper.
The top line of the black frame must be located
1.5 mm (0.06 inch) below the upper edge of
the paper, and the left line of the black frame
must be located 2.0 mm (0.08 inch) away from
the left edge of the paper. If the black frame
is deviated significantly, adjust the reference
position
(P.117)
2. Click [Proceed to Step 3].
NOTE
• Adjusting the Reference Position
When the reference position is correct, the top line of the black frame is located 1.5 mm (0.06 inch) below the
upper edge of the paper and the left line of the black frame is located 2.0 mm (0.08 inch) away from the left
edge of the paper. Adjust the reference position only when it is deviated significantly.
Vertical adjustment:
If the black frame is shifted upward, specify a
negative (-) value. If the black frame is shifted
downward, specify a positive (+) value.
Click the button (A) and then specify the
adjustment value.
Horizontal adjustment:
If the black frame is shifted leftward, specify a
positive (+) value. If the black frame is shifted
rightward, specify a negative (-) value.
Click the button (W) and then specify the
adjustment value.