Canon 2162B002, Руководство пользователя

Страница: 630 / 807

Network Setting
Conguring the IP Address Using ARP and PING
Commands
This topic describes how to congure the IP address using ARP and PING commands.
To use the ARP and PING commands, you will need to know the printer’s MAC address. You can conrm
the MAC address on the Control Panel.
1.
Check the printer’s MAC address.
You can conrm the MAC address on the Control Panel as follows:
1.
Press the Menu button to display MAIN MENU .
2.
Press ▲ or ▼ to select Interface Setup , and then press the ► button.
3.
Press ▲ or ▼ to select Ethernet Driver , and then press the ► button.
4.
Press ▲ or ▼ to select MAC Address , and then press the ► button.
You can also print information on the printer status, which includes the MAC address, as follows:
1.
Press the Menu button to display MAIN MENU .
2.
Press ▲ or ▼ to select Test Print , and then press the ► button.
3.
Press ▲ or ▼ to select Status Print , and then press the ► button.
4.
Press ▲ or ▼ to select Yes , and then press the OK button.
The MAC address is indicated in the printer status information in the following location.
2.
In Windows, open a command prompt or MS-DOS prompt, or in Mac OS X, start Terminal.
3.
Execute the following command to add entries to the ARP table for managing IP addresses
and corresponding MAC addresses.
arp -s [IP address] [the printer’s MAC address you have veried]
Example: arp -s xxx.xxx.xxx.xxx 00-00-85-xx-xx-xx
Note
•
In Mac OS X when using Terminal, enter the arp command in the format “arp -s xxx.xxx.xxx.xxx
00:00:85:xx:xx:xx.” For details, refer to the help le for the command line.
616 Network Setting