Campbell CR3000 Micrologger, Руководство оператора

Страница: 457 / 644

Section 8. Operation
457
File Control Functions
File Control Functions Accessed Through
Stopping program execution
File Control
2
, web API FileControl
Renaming a file FileRename()
6
Time-stamping a file FileTime()
6
List files File Control
2
, FileList()
6
, web API ListFiles
Create a data file from a data table
TableFile()
6
, Keyboard/display: Data | Final Storage
Data | Copy Data To CRD:
8
JPEG files manager
CR1000KD Keyboard/Display, LoggerNet |
PakBusGraph, web API NewestFile
Hiding files Web API FileControl
Encrypting files Web API FileControl
Editing programs CR1000KD Keyboard/Display
Abort program on power-up Hold DEL down on datalogger keypad
1
Datalogger support software
(p. 90)
Program Send
(p. 550)
command
2
Datalogger support software File Control
(p. 539)
utility
3
Device Configuration Utility (DevConfig)
(p. 113)
software
4
Manual with Campbell Scientific mass storage device or memory card. See Data Storage
(p. 445)
5
Automatic with Campbell Scientific mass storage device or memory card and Powerup.ini. See Power-up
(p. 460)
6
CRBasic instructions (commands). See data table declarations, File Management
(p. 456),
and CRBasic Editor
Help
7
Datalogger support software Retrieve
(p. 539)
command
8
Not intended to copy tables already written to the card. Allow the copy of all other tables to either SC115 or
card. A simple data copy, no format choice, number or records choice etc. Format will be TOA5 with _toa5
appended to table name upon successful transfer. You can copy individual files or select the All Tables option
(again, this is all tables not already written to the card, so no CardOut() tables or tables that have already been
written via TableFile()). Keep in mind toa5 can take a bit to transfer if there is a large amount of data. It is
important not to remove the card or the SC115 until the red LED that indicates file writing has stopped flashing.
Once the LED has stopped flashing, you can use File Control or remove the card/SC115 to look for the
appropriate files with _toa5.
8.8.5.1 File Attributes
A feature of program files is the file attribute. Table CR3000 File Attributes
(p. 458)
lists available file attributes, their functions, and when attributes are typically
used. For example, a program file sent with the support software Program Send
(p. 550)
command, runs a) immediately ("run now"), and b) when power is cycled
on the CR3000 ("run on power-up'). This functionality is invoked because
Program Send
sets two CR3000 file attributes on the program file, i.e., Run Now
and Run on Power-up. When together, Run Now and Run on Power-up are
tagged as Run Always.